Our company gives full play to the advantages of technology, information, equipment and corporate management in water treatment and beverage filling to ensure that the latest international water treatment technology and technology are applied to our equipment and solutions.
The Aluminum Bottle Aluminum Cap Beverage Automatic Filling Line is composed of Water Chiller, Double tank soda water mixer and Isobaric three-in-one filling machine.
Process of Double tank soda water mixer
1.The original gas in the material is separated from the material through a vacuum deoxidation tank to facilitate subsequent mixing of carbon dioxide.
2.The equipment cools down the material.
3.After the temperature drops to 3-4 degrees, the mixing tube starts to mix carbon dioxide.
4.After initial mixing, the material is pumped into the mixing tank through the booster pump for secondary mixing
5.The terminal is equipped with a small heat exchanger to prevent the material from heating up before entering the filling machine.
Isobaric three-in-one filling machine HY8-8-3
Filling process of gas-containing beverage
Empty bottle → conveying → washing and draining inside and outside upside down → inflation valve (maintain equal pressure) → filling → capping
Components details and quantity
Washing head: 8pcs
Filling head: 8pcs
Capping head: 3pcs
Flushing pump: 1pcs
Filling pump: 1pcs
Main motor: 1pcs
|Main engine power||2.2KW|
|Washing pump power||0.37KW|
|Filling pump power||0.55KW|
|Capping device power||0.25KW|
|Air blower power||0.75KW|
|Conveying line motor||0.75KW|
|Working voltage AC||380V 50HZ, 3 phase electricity|
|Water consumption (sterile water)||About 1 cubic meter/hour (water consumption is adjustable )|
|Water pressure||0.2-0.4 Pa|
This Aluminum Bottle Aluminum Cap Beverage Automatic Filling Line is special for aluminum bottles such as the Alum-tek, Exal, or Trivium bottles.